＊We are specialized in OEM ＆ ODM＊

Code No.: SL005
Standards: AC110~230V/ 50~60HZ,any kind of plugs
Dimension: 137mm x 93mm x 200mm
Material: PS
Color: Safe color
Power: 4.5W
Maximum of flow: 300 L/H
Suitable for: 30~60cm aquarium
Country of origin: Taiwan
Brand: Sinn Long
Advantages: Self- R&D, self-manufacture and patent product.

Part List:

1. Air Control Valve
2. Cover of Body
3. Air Wood (Air Stone)
4. Upward Board
5. Inner Tube (Connect with Pump)
6. Flow Control Valve
7. Water Inlet
8. Dirt Collection Cup
9. Meshed Fingerling
10. Body
11. Pump (300L/H)
12. Bio-sponge
13. Filtration Cotton Cartridge
14. Check Valve
15. CO2 Inlet
16. Sewage Collection Cup Connector and Rubber Cover

Functions:

1. It can filter and remove the toxic protein.
2. To check whether all parts are at the right positions or not.
3. At first time, fill the skimmer up with water, then connecting the power cord to start the skimmer.
4. After the operation of skimmer, start the air pump. Regulating the speed of the air valve that you want, it would be able to filtration and do skimming.
5. More air, the speed of collection is faster; less air, the speed of collection is slower.
6. The water level should not exceed the maximum water level rod.

Maintenance:

Please use the clean wiper with the warm water to wipe the appearance of body lightly, do not use the medicament to wipe it, which would cause unnecessary corrosion to make the product tarnish. Please use the water, the temperature as the aquarium used, to wash the filtration sponges. If it can't be used anymore, please abandon it with the statute of plastic in your country, do not abandon it at will. The sponges that we used are made up with the materials of environmental protection, it can abandon directly. These are our duties to do the environmental protection, please follow the above thoroughly.

Warning:

1. Please consult the standards of voltage that marked upon the electric appliances carefully, whether they conform to your country's voltage or not.
2. Please don't disassemble the electric appliances in order to prevent to get shocked.
3. Please don't alter the voltage by oneself or do any refit to the electric appliances.
4. The socket must be higher than the products to prevent the shock or electrical fire, if the water following the cord to the power socket
5. Be sure to remove the power cord when you clean up the appliance or change the sponge.
6. Hand is wet can’t touch the plug of product.
7. Product using a long time has occur decay, please change new product immediately.
8. Using the product must according to the usage lest using not appropriate occur to get an electric shock of danger.