＊We are specialized in OEM ＆ ODM＊
Code No.: SL302
Name: Infrared Rays Microcomputer Heater Controller
Standard: AC110V~120V / 220V~240V 50~60Hz
Suitable for:
SL302-1 is suitable for aquarium of 45~50L
SL302-3 is suitable for aquarium of 135~150L
Watt:
150~200W (SL302-1)
500~600W (SL302-2)
Setting range of water temperature: 20°C~33°C
Displaying range of water temperature: 5°C ~40°C
The rate of heating:
SL302-1: aquarium of 45~50 L → 1°C /hour
SL302-3: aquarium of 135~150 L → 1°C /hour
Material: ABS fireproof material
Accessory: A remote control
Precision: ±1°F
Brand: SINN LONG
Advantage: Self R&D and made in Taiwan.
Function:
-
It could heat and do the temperature controlling automatically in the aquarium.
-
The product would disconnection automatically after leaving the water.
-
Suitable for marine and freshwater aquarium.
-
Electricity-saving, energy-saving and high efficiency.
-
All power cords have CE and UL certifications.
-
The automatic temperature control system.
-
The temperature is adjusted by remote control.
-
Patent product.
-
Waterproof
How to use:
-
Please put the temperature controller vertically or horizontally into the water completely, then connect the power cord and use the remote controller to set the temperature.
-
The product should dip into the water completely in use, and the largest depth of it is 1.2M.
-
The preset temperature of product is 25°C when the first time of use or re-electricity after the unusual black-out.
-
The instruction of the enclosed remote control:
-
Up key【▲】, down key【▼】, turn on/ turn off key【】。
-
The displayed range of temperature: 5~40°C
-
The setting range of temperature: 20~33°C
(The temperature of first plug in is 25°C.)
The displayed temperature would twinkle during the regulation of setting temperature, it would stop twinkling after 3 seconds and way back to the temperature at the time.
-
The heater has 180-second postponed protection system, after connecting the power cord 180 seconds, it would start heating.
-
The red light would be displayed during the heating, when it has finished heating, the red light would disappear.
-
Setting temperature＞1°C, the heater would stop heating.
Setting temperature＜1°C, the heater would keep heating.
The breakdown handbook:
-
When the machine is abnormal, the LCD panel will display【E1/E2】.
-
If there is【EE】on the panel, it would has the situation as below:
-
The temperature of water is over 34°C and【EE】would display for 1 minute, the product would disconnection coercively.
-
If the heater leave water during heating,【EE】would display, the product would OFF coercively, the remote control would not operate.
The solution of emergency:
If there is any emergent accident, please turn off the product as soon as possible, and pull out the power cord to assure of safety.
Warning:
-
Please consult the standards of voltage that marked upon the electric appliances carefully, whether they conform to your country's voltage or not.
-
The plug of product is three holes plug, please do the grounding works with its specifications.
-
Please follow the instruction when using the product and being careful of your safety.
-
Please don't alter the voltage by oneself, disassemble the electric appliances or do any refit to the electric appliances in order to prevent to get shocked.
-
It needs to be U font of power cord to prevent the water following the cord to the power socket.
-
Please put the heater into the water completely.
-
Put the product in the place which is good circulating perpendicularly or horizontally.
-
Do not let the child or person who is feeble to use the products without watch over by adults.
-
Please pull out the power cord during the maintenance or stop using the products.
-
According to the need of technique, our company has the authority of alteration. The products are in accordance with real goods.
-
Please use the clean wiper to wipe away lightly with the warm water while cleaning the product, don't use the drug to polish.
|
